Pulse bag filter is widely used in cement, steel, electricity, food, metallurgical, chemical and other industries, the overall capacity increases several times, become the filter area > 2000 m2 large dust catcher (GB6719-86), is to solve the traditional filter is fine dust collection, filter, filter bag wind speed is high, the effect is easy to wear broken, high operation cost of the better solution, compared with the existing on the market all kinds of bag, electrostatic precipitator with large effective filtering area, low differential pressure, low emission, small volume, long service life, etc, become the new direction of the development of the industrial dust collector.
The following points should be paid attention to in the operation of pulse bag filter:
1. the pulse bag dust remover shall regularly check the operation status of the dust cleaning device.If the electromagnetic pulse valve is found abnormal (leakage, diaphragm damage, valve internal channel blockage, electromagnetic valve failure, etc.), or switch valve open, close not in place and leakage, or vibration mechanism failure, should be promptly handled.
2. when dust removal and discharging by dust hopper, the operation status of the half-set of dust discharging and conveying shall be checked simultaneously.If any abnormality is found, deal with it in time.
3. observe and pay attention to ipc and computer equipment frequently, and deal with problems in time.
4. regular inspection of compressed air air purification device.
5. release water from buffer tank and air storage tank at regular intervals.
6. regularly check the patency of pressure sensor pressure tube.Any blockage should be dealt with in time.
7. the use of filter bag should be checked regularly, and its intensity attenuation should be detected to predict its service life
8. often pay attention to dust emission concentration at the outlet of dust collector.If there is any standard, and it is determined that the filter bag is damaged, the filter bag should be changed or temporarily sealed.