Scraper conveyor operation rules, its main content includes the following:
I. requirements for use:
1. conveyor after stopping, in the switch to hang warning signs, so as to be able to play a warning role.
2. the rotating part of the conveyor, should be set with a protective fence or protective cover, in the tail should be set with a guard plate, pedestrians should be set to cross the bridge, to ensure that it can run.
3. The scraper conveyor should be stopped in the no-load state.
4. The conveyor shall be started without load to avoid forced start and damage to the conveyor.
5. before the conveyor starts, to carry out a comprehensive and careful inspection, in order to check whether there are problems, each should be included, not a trace of omission.Inching test can only be carried out after there is no problem.Only when the test run is in order can we start.
6. once the fault occurs, should immediately stop, and should comply with the rules and regulations of stopping treatment of the fault.
Ii. Technical operation rules:
1. the scraper conveyor should have overload protection device and other protective devices, in order to prevent the overload of equipment start, or some other abnormal operation, so as to ensure the scraper conveyor.
2. the feeding should be uniform, the chain should be free of jam or jump, and whether the sweeper is intact and reliable.
3. the operator should be on duty with a certificate, very familiar with the machine and equipment, know how to correctly operate, before the operation should wear labor protection equipment.