Brief introduction of inspection and maintenance method of pz-088 uniaxial dust humidifier

Model pz-088 uniaxial dust humidifier has simple structure, easy to manufacture, install, maintain and manage, low equipment investment and operating costs, and has been widely used to separate solid and liquid particles from airflow, or solid particles from working weight.Under normal operating conditions, the centrifugal force acting on particles is 5 ~ 2500 times of gravity, so the efficiency of pz-088 uniaxial dust humidifier is significantly higher than that of gravity settling chamber.

Pz-088 uniaxial dust humidifier should be inspected and maintained regularly in use:

◎ whenever the maintenance is over, carefully check whether there are any tools or other debris into the equipment.Check whether the installation of each protective cover is proper and should not be carried out rashly.

◎ in the treatment of harmful, toxic gas dust collector inside the maintenance, to prevent possible hypoxia and harmful gas poisoning accidents, can be the system gas replacement with air.

◎ pz-088 single-shaft dust humidifier is in maintenance operation, first cut off the power supply, the operator carries the key to the operation plate, and put "maintenance under way, no operation" on the plate.

◎ vibration device, star unloader, exhaust fan and other transmission devices, such as coupling, transmission belt, transmission pulley, etc., should be equipped with protective cover, to prevent bolts loose, belt, chain break flying injury.

◎ for dealing with the bag collector containing flammable and explosive dust gas, such as the bag dust collector used by coal mill, dust should often accumulate in the dust collector, to prevent combustion or explosion, should prevent the ignition into.Do not use electric welding or gas welding to repair pipeline or shell during operation.