HEBEI SHAN GAO ENVIRONMENTAL PROTECTION EQUIPMENTCO.,LTD.
  • YJD-B star loaderYJD-B star loaderFeatures of yjd-b star unloader:It can also be designed and manufactured according to ...
  • Drum dust humidifierDrum dust humidifierCompared with drum type humidifier, dust humidifier has large output, reliable operati...
  • Two way disc valveTwo way disc valveTwo-way valve is two-way open, with driving device at both ends of the valve, which is...
  • Stainless steel water valveStainless steel water valveStainless steel valve can be used to control the flow of water, steam, oil products, g...
  • Three general formula distributorThree general formula distributorLet's talk about the points to pay attention to when using the three-way material dist...
  • CURRENT POSITION:HOME > NEWS > COMPANY NEWS >

    Notes for operation of pulsed backblowing cloth bag dust remover

    RELEASE DATE:2019-08-27 PUBLISHER:BACKUPDATA

    Notes for operation of pulsed backblowing cloth bag dust remover:

    Carry out the operation rules of the position carefully, know the site environment and equipment use condition, know gas knowledge.Keep in touch with the duty room of the pulsed backblowing cloth bag collector and report the problem to the duty room in time.Responsible for the operation and accident handling of the system under the team leader.Shift reporting is accurate and records must be clear.Each time to the site to check equipment, leak and deal with accident personnel, more than two people, to prevent gas poisoning.No off-duty personnel are allowed to use the equipment.Equipment maintenance, to cut off the power supply, and hang the maintenance card.

    Plan the operation method of wind abatement and sudden accident abatement.

    The wind rest of the pulse-backblowing cloth bag dust collector can be divided into temporary rest (time not exceeding 1 hour), planned rest (1 hour ~ 8 hours), fault shutdown, long-term rest.

    After receiving the notification of wind suspension of the pulse-blowback bag-filter and opening the release valve on the top of the furnace, close the electric butterfly valve door of the gas pipe network, and close the electric blind plate valve.

    It is necessary to carry out the operation of backblowing and discharging dust before wind break of cloth bag filter.After the wind rest, close into the gas pipeline butterfly valve, blind valve.Close the inlet and outlet butterfly valve and blind plate valve of the box body to enter the maintenance state.

    Sudden failure shutdown of pulsed backblowing cloth bag dust collector: when the pulsed backblowing cloth bag dust collector has unexpected water suspension, power failure and equipment failure, the operation shall be conducted according to temporary wind break.Long - term wind rest operation should be carried out before wind rest.The hot air stove is off.After receiving the signal of opening the discharge valve on the top of the furnace, close the coal net valve and blind plate valve.Open the box body release valve and waste, clean gas pipe release valve.Close the butterfly valve and blind plate valve before the regulating valve group enters the net.Open nitrogen purge valve to purge residual gas.Turn off the signal power to make the cabinet stop working.Close clean gas blind plate valve.

    Pulsed backblowing cloth bag filter is a kind of large mechanical equipment, which should be prepared in advance when we run it.There is pulse back blowing cloth bag dust collector when running back to generate a lot of heat energy, the use of electrical appliances or electrical wire design to comply with our provisions, the whole pulse back blowing cloth bag dust collector working environment, so that can ensure the operation and is the operator's personal.