Let's talk about the points to pay attention to when using the three-way material distribution valve:
1. Manual three-way material distribution valve is controlled by wrench in the conversion of two directions. There should be arrows indicating the flow direction.
2. Transport and change forward, stop the feeding at the section of the pipe, and only after stopping the feeding, can the reversing operation of the three-way material distribution valve be carried out.
3. Under normal working conditions, the valve can be driven to reverse direction when the air source pressure is 0 and 4MPa. If the valve cannot be driven when the air source pressure reaches 0 and 6MPa, stop the valve for inspection and troubleshooting.
4. Check regularly whether pneumatic devices and accessories work normally and whether the inlet and outlet air pipes are loose.
Three-way material distribution valve is mainly composed of body, valve shaft, valve plate, crank mechanism, electric push rod (electro-hydraulic push rod, pneumatic push rod or manual mechanism).Small size, light weight, good wear resistance, long service life, low resistance, is the use of electric push rod, electro-hydraulic push rod, pneumatic push rod drive, can quickly switch the flow of materials.Three-way material distributing valve is an ideal equipment for reversing and distributing solid particles and powder materials in building materials, chemical industry, electric power, light industry, grain and other industries.Electro-hydraulic fan gate is widely used in building materials, metallurgy, mining, electric power, chemical industry, light industry, food and other industries.The electro-hydraulic fan gate directly fixed the electro-hydraulic push rod on the gate body to avoid the trouble of users in site positioning. The installation is simple and the structure is simple. It is welded with steel plate and driven by electro-hydraulic push rod.