The machine has the characteristics of compact structure, good overall performance, advanced technology, reasonable process, high reliability, good sealing performance, small water adjustable wear, large handling capacity, long life, continuous operation and low failure rate.Biaxial humidifying machine installed in ash library, ash hopper bottom, the impeller feeder (electric air lock) input your dry blues evenly inside the machine, do the blues on the directional operation of ratchet scattered and limited water (water) can be adjusted by forced mixing, and will to the expected material after the humidity, through screw conveyor belt will mix to the discharging mouth, reach the purpose of solving the secondary dust.
Application of dual-axis dust humidifier in dust removal:
Biaxial dust humidifying machine can produce important changes in the dust the dust, will not affect the normal use, guarantee the production process in the work, but in use shall be carried out in accordance with the working principle and way of use, ensure that the use of work efficiency and dust removal effect, to punish severely in the actual use of life and value.
The dual-axis dust humidifier can produce important changes and functions in dust removal. In actual production and use, production and production are carried out in accordance with the technological parameters, so as to ensure that it can play an important role in actual work and extend the service life and value.The dual-axis dust humidifier is used in accordance with the working principle, to ensure the full play of the role and performance in use, in the industry can drive the progress of the industry, reduce the pressure of the environment, and produce important dust removal effect for different forms of dust removal.
1. Before starting, carefully check whether all parts of the double-shaft dust humidifier are complete, whether fasteners are tightened, and whether the sealing parts are tight.
2. No. 30 or no. 40 mechanical oil is injected into the reducer, and the user can choose appropriate lubricating oil according to local conditions before putting into normal operation.
3. The feeding, water supply and shutdown of the machine shall be stopped first after the machine starts and runs normally, and the machine shall stop after the material is emptied in standby.If the motor load of the double-shaft dust humidifier is found to increase or decrease suddenly during operation and there is abnormal phenomenon in the mechanical system, stop the machine immediately for inspection and troubleshooting.Continue to put into production after troubleshooting.