Electro-hydraulic fan gate is widely used in building materials, metallurgy, mining, electric power, chemical industry, light industry, food and other industries.The electro-hydraulic fan gate directly fixed the electro-hydraulic push rod on the gate body to avoid the trouble of users in site positioning. The installation is simple and the structure is simple. It is welded with steel plate and driven by electro-hydraulic push rod.Three-way material distribution valve using steel plate welding structure, with small volume, light weight, small resistance.Using electric push rod (electro-hydraulic, pneumatic push rod) drive, can quickly switch material flow.This valve is mainly composed of body, valve shaft, valve plate, crank mechanism, electric push rod (electro-hydraulic push rod or manual mechanism) and so on.When working, the electric and hydraulic push rod reciprocates in a straight line, (manually by external force) drives the valve shaft through the crank, and the valve plate makes the Angle swing, so as to achieve the purpose of controlling the flow direction of materials and distributing materials.Three-way material distribution valve is mainly composed of body, valve shaft, valve plate, crank mechanism, electric push rod (electro-hydraulic push rod, pneumatic push rod or manual mechanism).Small size, light weight, good wear resistance, long service life, low resistance, is the use of electric push rod, electro-hydraulic push rod, pneumatic push rod drive, can quickly switch the flow of materials.Three-way material distributing valve is an ideal equipment for reversing and distributing solid particles and powder materials in building materials, chemical industry, electric power, light industry, grain and other industries.
Let's talk about the points to pay attention to when using the three-way material distribution valve:
1. Under normal working conditions, 0.4MPa air pressure can drive reversing.If the air source pressure reaches 0.If the valve cannot be driven at 6MPa, stop the machine for inspection and troubleshooting. Do not increase the air source pressure to avoid human damage.
2. Check regularly whether pneumatic devices and accessories work normally and whether the inlet and outlet air pipes are loose.
3. Three-way material distribution valve is controlled by wrench in the conversion of two directions, with arrows indicating the flow direction.
4. Transport and change forward, stop feeding at the section of the pipe. Only after stopping the feeding, can the reversing operation of the three-way material distribution valve be carried out.