Features and USES of electric disc valve:
With compact structure, wear resistance, small leakage, easy operation, flexible operation and labor-saving, the electric plugboard valve can work normally under high temperature, high dust and strong magnetic field.Electric board valve is the main equipment to control the flow of powder, grain and small particle.Electric plug board valve is widely used in metallurgy, mining, building materials, food, chemical and other industries.The gate is equipped with electric, pneumatic and electro-hydraulic push rod as the driving device, which is an ideal device for controlling the flow rate and cutting off quickly.
Electric plug plate valve is also called electric spiral gate valve, electric plug plate door is usually used in combination with the discharger. The diameter of electric plug plate valve is matched with the material inlet of the discharger, there are two kinds of square and circular.The advantage of this electric plug valve is that the valve body size is not groove, the medium will not jam, and has the characteristics of full flow flow, suitable for the use of powder particle medium in the pipeline.Electric plug board valve with stable work, simple structure, flexible operation, high strength, good performance, long service life, time and labor saving advantages, but also according to the requirements of the installation environment using carbon steel, stainless steel and other materials, by environmental protection, metallurgy, chemical industry, building materials, cement, food and other industries.
Electric disc valve is a gate and seat always close contact seal valve.The opening and closing part of the electric switchboard valve is the gate, and the movement direction of the gate is perpendicular to the direction of the fluid. The electric switchboard valve can only be fully opened and closed, and cannot be adjusted and throttled.The gate has two sealing faces. The two sealing faces of the gate valve are wedge-shaped, and the wedge Angle varies with the parameters of the valve.Principle: the gate is opened with a round mouth of the size of the diameter, which is opened and closed by the gate so that the round mouth on the gate does the action of disengaging and matching with the diameter.